SpeedyScaf

Quick and easy.

With the Speedy assembly frame Lightweight, the Layher SpeedyScaf equipment has been the recognized leader for decades in insertion-frame systems. Modern, fast and robust, making it ideal for work on facades. Layher SpeedyScaf is, thanks to its versatile and well thought-out range of parts, equally economical to use in scaffolding construction and in professional trades.

Quick and easy

With just six basic elements and a few manual operations, this logically and safely erected scaffolding is "speedy" because it is assembled without bolts. Numerous expansion parts permit optimum adaptation to existing building geometries – without much extra effort during assembly. SpeedyScaf is available in different scaffolding widths, made of hot-dip galvanized steel or lightweight aluminium, for every application.

Guaranteed with building authority approvals:
  • SpeedyScaf 70 Steel Z-8.1-16.2
  • SpeedyScaf 100 Steel Z-8.1-840 and
  • SpeedyScaf 70 Aluminium Z-8.1-844

Further international approvals available.

ALWAYS THE RIGHT SCAF­FOLDING DECK FOR EVERY APPLICATION

The Xtra-N deck

Consisting of an aluminium frame with riveted steel cap and filled with a glass-fibre-reinforced and non-slip plastic board.

  • For use up to load class 3.
  • Available lengths from 0.73 m to 3.07 m.
  • Available width 0.61 m. (one-piece deck).
  • Integrated with Allround und SpeedyScaf

The Stalu deck

Durable aluminium deck with sturdy and riveted steel cap.

  • For use up to load class 6 depending on deck length.
  • Available lengths from 0,73 m to 3,07 m.
  • Available widths are 0,19 m, 0,32 m and 0,61 m.
  • Integrated with Allround and SpeedyScaf.

The Robust deck

Consisting of an aluminium frame with riveted steel cap, filled with a plywood board protected against rot.
  • Available lengths from 0.73 m to 3.07 m.
  • Available widths are 0.61 m and 0.32 m.
  • Width 0.61 m: For use up to load class 3.
  • Width 0.32 m: For use up to load class 6 depending on deck length.
  • Rapid assembly possible thanks to one-piece deck.
  • Integrated with Allround and SpeedyScaf.

The steel deck

Durable and sturdy scaffolding deck thanks to hot-dip galvanized steel, with perforated non-slip surface.

  • For use up to load class 6 depending on deck length.
  • Available lengths from 0.73 m to 4.14 m.
  • Available widths are 0,19 m and 0,32 m.
  • Rails with edge holes for steel tubes.

The benefits to you:
  • Higher carrying capacity than the designated load classes (see technical brochures).
  • Realisation of console brackets and cantilevers possible thanks the edge holes for steel tubes.
  • Attachement of console brackets to cover the gaps beyond the Euro Speedy assembly frame.
  • Precision-fit decking above the rosette possible thanks accuratley fitting shape of the cap.
  • Can be used in Allround and SpeedyScaf.

LAYHER, THE INTEGRATED SCAFFOLDING SYSTEM: APPLICATION-ORIENTED ACCESSORIES

Brackets

SpeedyScaf can be quickly widened inwards or outwards: The brackets are fastened with the welded-on half-coupler in the corner plate area or in corner areas as swivel brackets, using the spigot of the Speedy assembly frame Lightweight, to form a deck level with the main scaffolding.

A list of all available brackets can be found in the current SpeedyScaf Price List in the protected customer zone.

To the downloads

Anchoring

The scaffolding must be anchored vertically to and parallel with the façade, with resistance to both tensile and compressive stress. Layher offers quicker and safer solutions:

The SpeedyScaf wall tie, which is fastened by a double coupler in the corner plate area of the Euro Speedy Frame and is supported with the fork plate on the channel section of the Speedy assembly frame Lightweight.

The wall tie, which is connected with two double couplers to both upright tubes.

The SpeedyScaf corner plate coupler
For outside and inside brackets, continuous anchoring directly on the corner plate of the Speedy assembly frame Lightweight using the top hole is possible and ensures a greater height clearance at the top scaffolding level.

The ETICS tie is used for a controlled introduction of high forces, parallel to the facade, when using  thermal insulation compound systems.

A list of all available solutions can be found in the current SpeedyScaf Price List in the protected customer zone.

To the downloads

Roof brick guards

Roof brick guards must be used when there is any risk of slipping on the roof, and they are mandatory for a roof inclination of 20° and above. Either brick guards or protection nets can be attached to the brick guard support.

Stairway Access

The aluminium platform and comfort stairways offer increased safety, convenience and speed when ascending the tower. Transporting material is made easier by using the work decks as all-round walkways too.

In accordance with TRBS 2121 T1 regulations, stairways should be used when:
  • extensive amounts of material have to be transported via this access,
  • the ascent height in the scaffolding exceeds 10 m, or
  • extensive work has to be carried out.

The landing-type stairway is connected using the U-distance coupler to the main scaffolding.

Protective Roofs 

Layher weather protection roofs can be used in a number of variants depending on their span, the snow load or the wind load. That saves you real money when planning temporary weather protection roofs. For easy use on the site, clearly set-out material and loading capacity tables for snow and wind loads are available for you. Protective roofs are not a one-off solution for Layher, but a standard product – this ensures readiness for immediate delivery.

Protect System

With its Protect System, Layher offers an enclosure system that fits in with Allround Scaffolding and SpeedyScaf. It is used for example for pedestrian protection in combination with the Allround Bridging System and also for  environmental protection and noise reduction. Highly economical to use thanks to quick and easy assembly in a simple and logical assembly sequence, and the frequent use of a few system components. The Layher Protect System is not a one-off solution for Layher, but a standard product – this ensures readiness for immediate delivery.
  • Only a small number of individual parts.
  • Quick, easy and logical assembly.
  • Visually attractive.
  • Designed for regular use.

LAYHER SPEEDYSCAF LIGHTWEIGHT 1.09 M

LAYPLAN CLASSIC AND LAYPLAN CAD

Time and material are crucial factors in scaffolding construction. To make the most efficient use of both, the Layher range includes the practical LayPLAN scaffolding planning software. Several software packages are on offer for different requirements: LayPLAN CLASSIC, LayPLAN CAD and LayPLAN CAD OEM.

Software

OUR STAFF are HAPPY TO assist you